Popular Articles
MoeBot: How do I install the boundary wire?
The boundary wire is used to tell your MoeBot where it can and cannot go. The line should be taut and a peg placed every 1 metre The line can be buried if you wish up to 4cm, but is not necessary After approx 6 weeks the line will not be visible as ...
MoeBot: How to replace a PCB board on a MoeBot
Please follow this link for the video instruction: https://youtu.be/JJd8pwbCqoI Was thi
PoolBot B150: Has debris and dust clogging the power switch mechanism
You may see flickering red and green lights while your PoolBot B150 is on charge if you have any debris stuck in the power switch mechanism. To identify the issue check if the power switch feels obstructed. Secondly visually inspect the power switch ...
PoolBot B150: Does not climb walls or steps
The PoolBot B150 may fail to climb walls due to the chemicals and salinity in your pool. You can simply install the foam pads provided with the PoolBot to provide extra buoyancy which will resolve the issue. Following is an image with a PoolBot B150 ...
PoolBot B150: Has corroded charging pins
To check for corrosion on the charging pins look for the following signs Blue pigment on the charger pins Broken charger pins The image below shows a normal and a corroded pin. Click to Zoom If your charger pin is slightly corroded use a small amount ...