PoolBot B150: Has flickering red and green lights while on charge

PoolBot B150: Has flickering red and green lights while on charge

Your PoolBot B150 may be malfunctioning due to a clogged power switch. To check for and resolve the issue follow the instructions here.


    • Related Articles

    • PoolBot B150: What does a yellow, pink, or red light on your PoolBot indicate

      The different indicator colours signal specific statuses of the PoolBot B150. Colour Status Blue Operating normally Yellow Low on charge Red Fault detected / Power Off Red on Charger Charging Green on charger Fully charged Pink No water detected If ...

    • PoolBot B150: Has debris and dust clogging the power switch mechanism

      You may see flickering red and green lights while your PoolBot B150 is on charge if you have any debris stuck in the power switch mechanism. To identify the issue check if the power switch feels obstructed. Secondly visually inspect the power switch ...

    • Poolbot B150: Does not turn on or charge

      Your PoolBot may not be turning ON or charging due to the following reasons. Corrosion of the charging pins Debris and dust clogging the power switch mechanism. To check for and fix corrosion of the charging pins follow the instructions here. To ...

    • PoolBot B150: The red light indicator is activated

      A red light indicator can be a sign of the following issues. Debris stuck in fan motor Hardware error First, check the fan motor for debris and resolve the issue by following the instructions by clicking here. If you do not find any debris or the fix ...

    • PoolBot B150: Has debris stuck in the fan

      If the red light indicator turns on and causes the unit to turn off right after submerging your PoolBot B150 it may be due to dust and debris stuck and obstructing the operation of the fan. This may also cause faster battery drain, motor ...