MoeBot: How to set up an isolated cutting zone

• Related Articles

• MoeBot: How do I clean my MoeBot?

  The best way to clean your MoeBot is with a stiff brush, do not bathe it! If you spray water underneath or bathe it this will void the warranty and possibly damage the cutting motor or electronics. If you wish to clean the top use a damp clothe.

• MoeBot: How does a robot lawn mower work?

  To use a robot mower, you first need to set up a boundary wire and docking station. The boundary wire is simple to install, it carries a low voltage signal that tells the robot mower where it can and cannot go. The boundary wire is normally pegged to ...

• MoeBot: What happens with dog poo?

  MoeBot will mow over it. The cutting motor operates between 3200 and 3500 rpm, same as a petrol mower. You may end up with poo on the wheels that will need to be brushed off, not hosed. Being extremely quiet, you can operate your MoeBot at night when ...

• MoeBot: "Motor Stall Error" / "Motor Hall Error"

  Motor stall can be a number of issues, generally easy to recitfy. Check to see how many blades are on the cutting plate, it should always have 3. Less than 3 creates an imbalance and can damage the motor. The cutting plate maybe too low and onsome ...

• MoeBot: Hardware error

  This can be numerous things. Bump sensor Cutting motor PCB board Contact customer service so we can help trouble shoot and identify what the specific issue maybe.