Related Articles
How to install your water tank on the Ultenic t10
Please follow this link for the video instruction: https://youtu.be/Plx7VPv4wic
How do I clean my MoeBot?
The best way to clean your MoeBot is with a stiff brush, do not bathe it! If you spray water underneath or bathe it this will void the warranty and possibly damage the cutting motor or electronics. If you wish to clean the top use a damp clothe.
What does a yellow, pink, or red light on your PoolBot indicate
The different indicator colours signal specific statuses of the PoolBot B150. Colour Status Blue Operating normally Yellow Low on charge Red Fault detected / Power Off Red on Charger Charging Green on charger Fully charged Pink No water detected If ...
Has debris stuck in the fan
If the red light indicator turns on and causes the unit to turn off right after submerging your PoolBot B150 it may be due to dust and debris stuck and obstructing the operation of the fan. This may also cause faster battery drain, motor ...
How does a robot lawn mower work?
To use a robot mower, you first need to set up a boundary wire and docking station. The boundary wire is simple to install, it carries a low voltage signal that tells the robot mower where it can and cannot go. The boundary wire is normally pegged to ...